Deck Hardware

Davey and Company

Bronze Flat Top Cleats

Bronze flat-top cleats with a wide base and four fixing points. These bar cleats are made in England and are available in a range of sizes. SKU Bar Length Base Width Base Length Fastenings Davey's Product Code 020131 4" (100mm) 1-1/4" (32mm)...

Davey and Company

Bronze Through-Bulwark Fairlead - Set of 2

Cast bronze oval fairleads for passing a mooring line through a bulwark or bulkhead. These solid bronze through-bulwark fairleads are made in England by Davey & Co. and come in two identical halves that can be screw-fixed, bolted or...

Davey and Company

Bronze Pelican Hook

Quality pelican hooks cast in gunmetal bronze and polished.   These 4" (100mm) versatile hooks are beautifully made in England and are available polished or chrome-plated to suit.

Davey and Company

Bronze Drain Plugs - Davey

Bronze drain plugs with screw plug insert, complete with rubber seal, available in a range of sizes. The thread is drilled so that when loosened, the plugs allow a small amount of water to drain.  Unscrew the plug completely for higher water...

Davey and Company

Brass Snap Shackles - Swivel Eye

Stamped brass snap shackles with a swivel eye.  These handy shackles are manufactured to a high standard in England. Available in a variety of sizes and safe working loads as set out below: SKUSizeSafe Working LoadDavey's Product Code 021421...

Davey and Company

Brass Snap Shackles - Fixed Eye

Stamped brass snap shackles with a fixed eye.  These handy shackles are manufactured to a high standard in England and have numerous marine applications. Available in a variety of sizes and safe working loads as set out below: SKUSizeFixed Eye...

Davey and Company

Bronze Stemhead Fitting - Lightweight

Cast bronze stem head fitting for sailing dinghies up to around 12' in length.  Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive fittings are made in England and can be fastened with 4...

Davey and Company

Bronze Eyes on Plate - Square

English-made quality bronze eye plates (or sash eyes) in a choice of rumbled bronze, polished bronze or chrome plated bronze finishes. These plates are ideal as tie-off points for fenders or deck lines. SKUFinishPlate SizeHeightRing Inside...

Davey and Company

Bronze Eyes on Diamond - Small

Cast from gunmetal bronze and made in the UK, these beautiful diamond eye plates are for lighter duties, such as attaching fender lines. With a diamond-shaped base, these bronze plates can be fastened with 8-gauge silicon bronze wood screws...

Davey and Company

Bronze Shell Vent

Stylish bronze vent commonly used for ventilating engine bays on timber motor boats. Part of the Davey range of boat hardware from England, these vents can be fitted with or without the included trim ring.  The trim ring is a separate component that...

Davey and Company

Mushroom Vents - Low Domed Pattern

Smaller low-profile mushroom ventilators with a domed profile.  Cast in bronze, these UK-made vents have a low spigot and are ideal for mounting flush to cabin tops and other areas unlikely to become awash. Their low, domed-profile means sheets will...

Davey and Company

Mushroom Vents - Low Flat Pattern

Smaller low-profile mushroom ventilators with a flat profile.  Cast in bronze, these UK-made vents mount flush to cabin tops.  With a lower spigot height they are more suited to areas unlikely to become awash. The ventilator can be operated...

Davey and Company

Davey Bronze Open Top Cleats

Solid bronze open top cleats made in England by Davey & Co. These cleats are beautifully cast and polished. Their open top design makes open top cleats useful as both a cleat and part-time fairlead. Available in a range of sizes and can be chrome...

Davey and Company

Brass Sailing Dinghy Sliding Gooseneck

A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing a shackle.  The spike requires a 12mm x 12mm...

Davey and Company

Bronze Lightweight 4-Piece Rudder Kit - Single Strap

Single strap bronze rudder kit suitable for lightweight dinghies of up to about 8 feet long. Made in England, this 4-piece set is beautifully cast and polished. The set consists of two transom-mounted gudgeons and two rudder-mounted pintles. The rudder...

Manganese Bronze Thimble - Closed

Quality New Zealand-made closed thimbles cast in manganese bronze. The 45mm thimble will take up to a 10mm rope, while the 67mm will take up to 14mm rope diameter under tension. SKUOverall LengthMax WidthSuits...

Bronze Drain Plugs - Flush

Australian-made half-inch bronze drain plugs (or garboard drain) with screw plug insert. SKUDiameterCutout Diameter BRG-B300B 2-1/4" (55mm) 1-1/4" (30mm)

Davey and Company

Bronze Mast Bands - 4 Eye

Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats.  These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a mast or bow sprit.   Note that...

Bronze Half-Cowl Vents (Pairs)

Australian-made cast bronze half cowl vents.  Sold in sets of port and starboard pairs, these bronze ventilators are normally mounted to engine compartments, cabins and pilothouse sides to improve the flow of air. Three sizes are available, and...

Hand-Held Bronze Bell

Beautiful Australian-made bronze hand-held bell, complete with a turned timber handle.  The handle is clear varnished. These hand bells are popular with auctioneers, for use as school bells and as gifts. Bronze bells resonate with a wonderful tone...