Description
Techniglue R60 is a high-strength adhesive suitable for bonding structural elements fabricated from timber, fibreglass, concrete and metal, and is commonly used in civil construction for mechanical fastenings and laminated beams.
These Techniglue R60 packs include resin and hardener.
Techniglue R60 has recently been tested and gained approval for VOC Compliance under the specification of the Green Building Council of Australia / Green Star Office Design V3 IEQ-13. R60 has high strength, is water-proof and has excellent gap filling properties.
Suitable for bonding:
- Wood
- Metal
- Stone
- Marble
- Fibreglass
- Pottery
- Some Plastics
Refer to ATL Composites' Techniglue datasheet for more details.
| Part Number | Resin Size | Hardener Size |
|---|---|---|
| ATL-321000 | 500ml | 250ml |
| ATL-321004 | 1lt | 500ml |
4 Reviews
-
A great product
Service was very good and quick delivery
-
product application
pictures also sent as requested
-
TECHNIGLUE R60 RESIN & HARDENER PACK
found it easy to mix and apply and it is strong. The tin seems to empty to quickly
-
One high strength glue!
Tremendous glue if your looking for a super strong, water resistant bond. Slower curing time allows the advantage to get clamps in optimum position. Gap filling properties useful. Care is needed when cleaning up the squeeze-out, I find methylated spirits on cotton cloth the most effective (dont forget the rubber gloves!) If you leave the glue to harden its a pain to remove- even with a sharp paring chisel its difficult to remove without taking a great chip of timber- the glues that strong!
Make sure you read the directions, accurate mixes give best results & abide by the safety directions.
