Spartan Marine Hardware

Bronze Flag Socket

A distinctive flag socket from Spartan Marine.  This simple pattern has a rounded-triangular base and will hold a 1" pole. SKU Base (L x W) Overall Height For Pole Size Fastenings Spartan's Code 18130870mm x 65mm60mm1" (25mm)3 x 8g ScrewsS648

Spartan Marine Hardware

Bronze Strap

A bronze saddle or lacing eye from USA company Spartan. This handy bronze strap has a slightly concave base so is ideal for mounting to a mast or boom. A 12mm (1/2") rope snugly passes through these eyes. SKU Length Width Height Spartan's Code ...

Spartan Marine Hardware

Bronze Chock - Straight

A range of cast bronze straight chocks or fairleads made in the USA by Spartan. Chocks are used at the bow, stern and amidships to guide mooring lines, anchor lines and other ropes.  They prevent rope wear and chafing of the gunwale. These chocks...

Spartan Marine Hardware

Bronze Hawse Pipe - Round

Made in the USA, these quality bronze hawse pipes allow mooring lines to be passed through gunwales and bulkheads. Sold individually, these fittings can be paired and the spigot can be shortened as required for a flush fit. SKU Outside Diameter (A)...

Spartan Marine Hardware

Bronze Hatch Ring Pull

Strong bronze hatch lifter with a burnished finish and a stainless steel pin. Made by Spartan Marine in the USA. SKU Width Length Height Spartan's Code 181126 2-1/2" (62mm) 3-1/8" (78mm) 3/8" (10mm) P594

Spartan Marine Hardware

Manganese Bronze Mid-Rail Fairlead

Spartan Marine Hardware

Bronze Deck Filler Cap - Water

This burnished bronze "Water" deck filler cap is manufactured by Spartan Marine (USA).  It has a low profile crown and rounded edges.  An O-ring provides a watertight seal, and the cap is attached to the deck plate with a small jack chain...

Spartan Marine Hardware

Bronze Tank Vent Elbow

Bronze elbow adapters with a 5/8" BSP thread.  These elbow fittings are compatible with Spartan's bronze threaded tank vents. SKU Overall Length Spartan's Code 180107 2-1/4" (55mm) A112

Spartan Marine Hardware

Bronze Ring (3/8")

A solid bronze ring from Spartan Marine.  This ring is a versative piece that combines nicely with a bronze saddle to secure ropes for mooring lines, hand rails, etc. SKU Inside Diameter Outside Diameter Ring Thickness Spartan Marine's Code ...

Spartan Marine Hardware

Manganese Bronze Locking Chock

This bronze locking chock has been designed to quickly accept an anchor or mooring line and lock it in place. This chock can also be considered for the stern where rising and falling tides can easily cause a dock line to escape from a straight chock...

Spartan Marine Hardware

Bronze Jam Cleat (3")

Spartan Marine Hardware

Bronze Jam Cleat (6")

Spartan Marine Hardware

Bronze Fairlead - G-Chock (Pair)

Solid bronze G-chocks from Spartan Marine.  Sold in pairs, these chocks have a burnished bronze finish. SKU Length Width Height Hole Centres Spartan's Code 180341 4" (107mm) 1-1/8" (28mm) 1-1/4" (35mm) 3-1/4" (82mm) C246/C246PB 180342 5"...

Spartan Marine Hardware

Bronze Exhaust Flange

Bronze exhaust outlets from Spartan Marine in the USA. These high-quality fittings have three mounting holes with long hose adapters to penetrate through the transom. SKUSuits Hose DiameterHose TailFlange DiameterFastenings SPA-303 1-1/2"...

Spartan Marine Hardware

Bronze Dinghy Quarter Knees

Gunmetal bronze quarter knees suitable for transom braces on small dinghies.  Mounted with 4 x 10-gauge screws. Each bracket offers a 1/4" (6mm) hole for mainsheet bridle termination where a sailing rig is used. Notes: 1. This fitting has rather an...

Spartan Marine Hardware

Bronze Deck Filler Cap - Diesel

This burnished bronze deck filler cap from Spartan Marine (USA) is marked "Diesel".  It has a low profile crown and rounded edges. An O-ring provides a watertight seal, and the cap is attached to the deck plate with a small jack chain. ...

Spartan Marine Hardware

Bronze Hasp with Spring

Gunmetal bronze spring hasps from Spartan Marine.  These useful hatch fasteners come in two sizes - 3-1/4" and 4" - with a burnished finish. SKU Overall Length Staple Dimensions(L x W)    Hasp Dimensions(L x W)  Hole Centres(L...

Spartan Marine Hardware

Bronze Coaming Cleat

A solid bronze 5" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with two 1/4"-20 (UNC) threads and a bronze backing plate is available for secure mounting (machine screws and backing plate are sold...

Spartan Marine Hardware

Bronze Coaming Cleat - Diamond

A solid bronze 6" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with three 1/4"-20 (UNC) threads and a bronze backing plate is available for secure mounting (machine screws and backing plate are...

Davey and Company

Brass Belaying Pins

Belaying pins are used to secure the running rigging on traditional vessels.   These small brass belaying pins from Davey & Co. are available in a range of sizes and can be chrome-plated to order (additional charges apply). If you are looking...