Deck Hardware

Spartan Marine Hardware

Bronze Deck Filler Cap - Diesel

This burnished bronze deck filler cap from Spartan Marine (USA) is marked "Diesel".  It has a low profile crown and rounded edges. An O-ring provides a watertight seal, and the cap is attached to the deck plate with a small jack chain. ...

Spartan Marine Hardware

Bronze Coaming Cleat

A solid bronze 5" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with two 1/4"-20 (UNC) threads and a bronze backing plate is available for secure mounting (machine screws and backing plate are sold...

Spartan Marine Hardware

Bronze Coaming Cleat - Diamond

A solid bronze 6" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with three 1/4"-20 (UNC) threads and a bronze backing plate is available for secure mounting (machine screws and backing plate are...

Davey and Company

Brass Belaying Pins

Belaying pins are used to secure the running rigging on traditional vessels.   These small brass belaying pins from Davey & Co. are available in a range of sizes and can be chrome-plated to order (additional charges apply). If you are looking...

Davey and Company

Timber Belaying Pins

Belaying pins are used to secure the running rigging on traditional vessels.   These finely turned ash belaying pins from Davey & Co. have a natural wood finish and are available in a range of sizes as set out below. If you are looking for...

Davey and Company

Bronze Belaying Pins

Belaying pins are used to secure the running rigging on traditional vessels.   These finely made gunmetal bronze belaying pins from Davey & Co. are available in a range of sizes and can be chrome-plated to order (additional charges apply). For...

Davey and Company

Bronze Boom End - Clew

Gunmetal bronze clew boom end from Davey & Co.  This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting to the boom.  The eye at the top of the...

Davey and Company

Bronze Boom End - Tack

Gunmetal bronze tack boom end from Davey & Co.  This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom.  The spikes of Davey's goose-neck fittings...

Davey and Company

Davey Round Fixed Deadlight

Heavy duty round fixed bronze portlights.  Traditionally hand-made in England to the highest standard and CE marked for upper hull areas and cabin sides. Supplied with an outside finishing ring, they are fitted with toughened glass and have a...

Spartan Marine Hardware

Bronze Deck Cleats - 4 Hole

Bronze deck cleats from US manufacturer Spartan.  These strong cleats feature four counter-sunk mounting holes to allow solid mounting through the deck. Available in a range of sizes, these cleats come in a burnished finish. SKU Arm...

Spartan Marine Hardware

Bronze Herreshoff Cleats

Bronze Herreshoff cleats from US manufacturer Spartan.  These strong, traditional cleats feature four counter-sunk mounting holes to allow solid mounting through the deck. Available in a range of sizes, these cleats come in a burnished finish...

Brass Filler Cap

Brass filler caps for fuel or water tanks, available in polished brass and chrome-plated finishes.   These fittings are designed for planked decks and can be mounted flush.  They come complete with rubber "O"-ring seal and the screw-in cap is...

Davey and Company

Bronze Chain Pipe

Traditional gunmetal bronze chain pipe (or spurling pipe) by Davey & Co. These sturdy fittings are available with a variety of inside diameters to suit both small and large vessels. They can be chrome-plated or left as a natural bronze finish.  ...

Davey and Company

Davey Bronze Cowl Vent

Cast gunmetal bronze cowl vents by Davey & Company in the UK, featuring a large circular cowl inlet which maximises cabin airflow. These beautifully cast and polished cowl ventilators come complete with a bronze deck plate and 2-pin bronze key...

Foresti & Suardi

Brass Boat Hooks - Double

Double brass boat hooks manufactured in Italy by Foresti & Suardi.  These quality boat hooks provide an economical alternative to bronze while maintaining that traditional look. Available in one size only to accept a 35mm tapered staff, which...

Foresti & Suardi

Brass Boat Hook

Brass boat hooks manufactured in Italy by Foresti & Suardi.  These quality boat hooks provide an economical alternative to bronze while maintaining that traditional look. Available in two sizes to accept either a 28mm or 35mm tapered staff,...

Davey and Company

Tufnol Sheaves - Spare Parts

Quality sheaves made from durable tufnol.  Thease sheaves are from Davey's range of sailboat fittings, and are sized to serve as spare parts for Davey's range of timber blocks. SKU Diameter Width  Bore Davey Code 025803 40mm 12mm 10mm...

Davey and Company

Aluminium Bronze Sheaves

Quality aluminium bronze sheaves.  Thease quality sheaves are from Davey's range of sailboat fittings.   SKU Diameter Width  Bore Davey Code 025800 40mm 12mm 10mm 0619/AB/040 025801 50mm 14mm 12mm 0619/AB/050 025802 60mm 16mm 12mm...

Davey and Company

Bronze Deck Plates - Threaded

Davey threaded bronze deck plates tapped with a metric thread of either 8mm, 10mm or 12mm. These versatile cast bronze deck plates will take any fitting with a metric stud and are ideal for when a fitting is not always required.   The following...

Davey and Company

Bronze Spinnaker Pole Slide

Cast bronze spinnaker pole slide by Davey & Co. to fit their 1" (25mm) internal track. These sliding cars have a knurled thumb screw to allow height adjustments along the track. Davey's code for this item is 3443/GM/025.