Cabin Hardware

Foresti & Suardi

Brass Butt Hinge - Short

Small all-brass butt hinges from Italian company Foresti & Suardi.  The hinges are drilled for 8-gauge countersunk screws (sold separately) and are available in polished brass and chrome-plated brass finishes. SKU Overall LengthBase...

Foresti & Suardi

Brass Hatch Hinge - Offset

Brass strap hinges from Italian company Foresti & Suardi.   These brass hinges are offset by 35mm (1-1/2") making them ideal for use as deck hatch hinges.   The hinges are drilled for 10-gauge countersunk screws (sold separately) and are...

Foresti & Suardi

Brass Strap Hinge - Asymmetric

Small asymmetric brass strap hinges from Italian company Foresti & Suardi. These brass hinges are drilled for 8-gauge countersunk screws (not included). SKU Overall Length Width Finish Fastening F&S Product Code 130725 103mm (4") 32mm...

Foresti & Suardi

Brass Strap Hinge

All brass strap hinges from Italian company Foresti & Suardi in two sizes. These brass hinges are available in two sizes and are drilled for 8-gauge countersunk screws Screws are sold separately.. SKU Overall Length Width Finish Fastening F&S...

Bronze Lacing Hook

Small cast gunmetal bronze lacing hook from Davey & Co.  Drilled to be fastened with two #6 countersunk screws. Note that the casting is not polished.  Both natural bronze and chrome plated items are slightly rough to the touch. SKU...

Brass Lacing Eye

Small stamped brass lacing eye or saddle from Davey & Co. Drilled to be fastened with two #8 countersunk screws. SKU Finish Overall Length Projection Width Davey Product Code CBS-022307 Polished 1-3/4" (45mm) 1/2" (12mm) 9/16" (13mm) 9507/BR ...

Foresti & Suardi

Brass Handrail Bracket - End Piece

Solid brass end-piece hand rail brackets made in Italy.  Use these brass brackets to hold longer hand rails above and below decks.  Also popular to construct stair rails around the home and other architectural purposes. These solid brass...

Foresti & Suardi

Brass Handrail Bracket - Centre Piece

Made in Italy, these solid brass mid-section brackets are available in three sizes and can be used to make brass tubing, or teak hand rails. The brass brackets are available in a polished brass or chrome-plated finish. SKUInside Diameter (A)Height...

Spartan Marine Hardware

Bronze Strap

A bronze saddle or lacing eye from USA company Spartan. This handy bronze strap has a slightly concave base so is ideal for mounting to a mast or boom. A 12mm (1/2") rope snugly passes through these eyes. SKU Length Width Height Spartan's Code ...

Spartan Marine Hardware

Bronze Hatch Ring Pull

Strong bronze hatch lifter with a burnished finish and a stainless steel pin. Made by Spartan Marine in the USA. SKU Width Length Height Spartan's Code 181126 2-1/2" (62mm) 3-1/8" (78mm) 3/8" (10mm) P594

Spartan Marine Hardware

Bronze Tank Vent Elbow

Bronze elbow adapters with a 5/8" BSP thread.  These elbow fittings are compatible with Spartan's bronze threaded tank vents. SKU Overall Length Spartan's Code 180107 2-1/4" (55mm) A112

Spartan Marine Hardware

Bronze Ring (3/8")

A solid bronze ring from Spartan Marine.  This ring is a versative piece that combines nicely with a bronze saddle to secure ropes for mooring lines, hand rails, etc. SKU Inside Diameter Outside Diameter Ring Thickness Spartan Marine's Code ...

Spartan Marine Hardware

Bronze Dinghy Quarter Knees

Gunmetal bronze quarter knees suitable for transom braces on small dinghies.  Mounted with 4 x 10-gauge screws. Each bracket offers a 1/4" (6mm) hole for mainsheet bridle termination where a sailing rig is used. Notes: 1. This fitting has rather an...

Spartan Marine Hardware

Bronze Hasp with Spring

Gunmetal bronze spring hasps from Spartan Marine.  These useful hatch fasteners come in two sizes - 3-1/4" and 4" - with a burnished finish. SKU Overall Length Staple Dimensions(L x W)    Hasp Dimensions(L x W)  Hole Centres(L...

Spartan Marine Hardware

Bronze Outboard Mounting Bracket

Spartan Marine's outboard bracket is made of cast bronze and heavy hardwood to provide a rugged, dependable method of mounting an outboard motor up to 6 h.p. on the stern of sailboats with an afterdeck of 200mm (8") or more.  Note that the...

Spartan Marine Hardware

Bronze Butt Hinges 4" - Spartan

Bronze butt hinge from US manufacturer Spartan measuring 3-1/2" x 1-3/8" (88mm x 35mm) when open. These bronze hinges feature a stainless steel hinge pin and can be fastened with 6 x 8-gauge screws.  They are suitable for hatches, doors cabinets,...

Spartan Marine Hardware

Spartan Bronze Strap Hinge

Bronze strap hinge from US manufacturer Spartan measuring 5-1/2" x 1-1/4" (148mm x 31mm) when open. These bronze hinges feature a stainless steel hinge pin and can be fastened with 6 x 10-gauge screws.  They are suitable for hatches, doors...

Davey and Company

Bronze Good Fortune Star

Every traditional vessel requires a bronze star on board to radiate positive energy. These bronze stars from Davey & Company are hand-cast and polished.  The central fixing hole allows your star to be fixed to the end of the boom, or any other...

Davey and Company

Brass Recessed Berth Light

Beautiful polished cast brass LED cabin lights and fitted with a frosted glass and switch. This recessed pattern is from Davey & Co. and requires a depth of 1" (25mm). Fitted with two warm white 60 lumen LEDs as standard, operating on 10-30...

Davey and Company

Brass Teardrop Berth Light

A beautiful heavy brass berth light from UK company Davey & Co. Polished cast brass and fitted with a frosted dome plastic lens and switch, this unique light is fitted with a warm white 60 lumen LED as standard. SKU Overall Height Width Finish...