Description
Suitable for larger day boats or small cruisers, this cast gunmetal bronze transom gudgeon is one of a set of four items making up Davey & Co's Heavy Duty Rudder Kit.
The kit features heavy-duty straps and 1/2" pins for additional strength. Note that the rudder gudgeon is canted by approximately 3 degrees.
The mounting plate measures 68mm wide by 58mm tall. The height of the fitting is 40mm and the hole centre is 28mm from the transom when installed.
This item can be chrome-plated to match existing stainless steel or chromed items already on your boat.
The four components of the kit are set out in the below table. Not that each of the four components and fastenings must be purchased separately.
SKU | Description | Pintle/Hole Diameter | Distance Between Straps | Inside Strap Length | Fastenings | Davey's Code | |
| 020807 | Rudder Pintle | 1/2" (12.5mm) | 2-1/2" (65mm) | 4" (100mm) | 4 x 10g screws | 1917/GM |
| 020808 | Rudder Gudgeon | 1/2" (12.5mm) | 2-1/2" (65mm) | 6" (150mm) | 6 x 10g screws | 1918/GM |
| 020809 | Transom Gudgeon **THIS ITEM | 1/2" (12.5mm) | N/A | N/A | 4 x 1/4" Machine Screws | 1919/GM |
| 020810 | Transom Pintle | 1/2" (12.5mm) | N/A | N/A | 4 x 1/4" Machine Screws | 1920/GM |
