Gunmetal bronze clew boom end from Davey & Co. This fitting fits over the end of the boom and has a double swivelling tang for roller reefing.
Two #8 countershunk holes are pre-drilled for mounting to the boom.
The eye at the top of the fitting allows the clew of the sail to be secured with a small shackle or line (up to 5mm or 1/4").
| SKU | Internal Diameter | External Diameter | Davey's Product Code | |
| 020432 | 2" (50mm) | 2-1/4" (56mm) | 9446/GM/C/050 | |
Davey and Company
Gunmetal bronze tack boom end from Davey & Co. This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to...
Davey and Company
A solidly cast bronze boom crutch socket from Davey & Co, complete with drain hole. Use this fittiing to lock a removable boom crutch in position within the cockpit. Available in a polished...
MURRAY - Traditional Winches & Marine Hardware
Robust manganese bronze track end caps MURRAY of New Zealand. These track fittings are compatible with Ronstan and Harken 32mm x 6mm "T" track. Also compatible with Wilmex bronze track.
Spartan Marine Hardware
A bronze saddle or lacing eye from USA company Spartan. This handy bronze strap has a slightly concave base so is ideal for mounting to a mast or boom. A 12mm (1/2") rope snugly passes through these...
Davey and Company
Exquisite small polished bronze blocks or pulleys in a beautiful tear-drop style, manufactured in the UK by Davey & Co. These blocks have brass sheaves. Note that the 1-1/2" bronze...
Davey and Company
Traditional bronze stanchions cast in gunmetal and with a polished finish. These tapered stanchions are 27mm at the base and are available in three heights. A choice of three...
Spartan Marine Hardware
A range of cast bronze straight chocks or fairleads made in the USA by Spartan. Chocks are used at the bow, stern and amidships to guide mooring lines, anchor lines and other ropes. They...
Davey and Company
Stylish bronze vent commonly used for ventilating engine bays on timber motor boats. Part of the Davey range of boat hardware from England, these vents can be fitted with or without the included trim...
Davey and Company
Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length. Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt...
