A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats.
Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing a shackle. The spike requires a 12mm x 12mm boom cut-out.
A thumbscrew locks the boom in any position on the sliding track.
This boom fitting is supplied with a 12" (30cm) length of 5/8" (16mm) internal brass track. The track may be fastened to the mast with 8g screws.
Davey and Company
Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track...
Davey and Company
Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet.
Spartan Marine Hardware
Gunmetal bronze quarter knees suitable for transom braces on small dinghies. Mounted with 4 x 10-gauge screws. Each bracket offers a 1/4" (6mm) hole for mainsheet bridle termination where a...
Davey and Company
Brass rectangular hit and miss vents in a range of sizes. Made entirely of brass in the UK by Davey & Co. Part NumberSize (W x H)StyleDavey's Product Code CBS-022658 6" x 3" (150mm x...
Davey and Company
Traditional brass round vent in the "Hit & Miss" style. A slide control is used to open and close the vent. Also available in chrome plated brass and stainless steel. Part NumberSizeDavey's...
