Bronze exhaust outlets from Spartan Marine in the USA.
These high-quality fittings have three mounting holes with long hose adapters to penetrate through the transom.
| SKU | Suits Hose Diameter | Hose Tail | Flange Diameter | Fastenings |
|---|---|---|---|---|
| SPA-303 | 1-1/2" (40mm) | 3" (73mm) | 3-1/4" (80mm) | 3 x 14g Screws or 1/4" Machine Screws |
| SPA-306 | 2" (50mm) | 3" (77mm) | 3-5/8" (90mm) | 3 x 14g Screws or 1/4" Machine Screws |
Bronze exhaust outlet flap with no tail. Manufactured in Australia, these bronze exhaust covers can be chrome plated to order. SKUInside DiameterFlange Diameter BRG-B369B 2-1/2" (62mm) 4"...
Spartan Marine Hardware
Made in the USA, these solid cast bronze hull fittings have a low profile design with radius edges. Featuring a caulking groove beneath the flange, these through-hulls are cast with internal dogs to...
Davey and Company
These acid-resistant stainless steel deck flanges are ideal for installing Davey's Hot Pot stove. All parts push fit together and are compatible for a 70mm installation. Available straight...
Davey and Company
Exquisite small polished bronze blocks or pulleys in a beautiful tear-drop style, manufactured in the UK by Davey & Co. These blocks have brass sheaves. Note that the 1-1/2" bronze...
Spartan Marine Hardware
A bronze saddle or lacing eye from USA company Spartan. This handy bronze strap has a slightly concave base so is ideal for mounting to a mast or boom. A 12mm (1/2") rope snugly passes through these...
Davey and Company
Traditional bronze stanchions cast in gunmetal and with a polished finish. These tapered stanchions are 27mm at the base and are available in three heights. A choice of three...
Spartan Marine Hardware
A range of cast bronze straight chocks or fairleads made in the USA by Spartan. Chocks are used at the bow, stern and amidships to guide mooring lines, anchor lines and other ropes. They...
Davey and Company
Stylish bronze vent commonly used for ventilating engine bays on timber motor boats. Part of the Davey range of boat hardware from England, these vents can be fitted with or without the included trim...
Davey and Company
Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length. Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt...
