A bronze saddle or lacing eye from USA company Spartan.
This handy bronze strap has a slightly concave base so is ideal for mounting to a mast or boom.
A 12mm (1/2") rope snugly passes through these eyes.
SKU | Length | Width | Height | Spartan's Code | |
| 181302 | 2-3/8" (58mm) | 5/8" (16mm) | 3/4" (19mm) | S621 |
Spartan Marine Hardware
Bronze strap hinge from US manufacturer Spartan measuring 5-1/2" x 1-1/4" (148mm x 31mm) when open. These bronze hinges feature a stainless steel hinge pin and can be fastened with 6 x 10-gauge...
Davey and Company
Single strap bronze rudder kit suitable for lightweight dinghies of up to about 8 feet long. Made in England, this 4-piece set is beautifully cast and polished. The set consists of two...
Foresti & Suardi
All brass strap hinges from Italian company Foresti & Suardi in two sizes. These brass hinges are available in two sizes and are drilled for 8-gauge countersunk screws Screws are sold separately....
Davey and Company
Exquisite small polished bronze blocks or pulleys in a beautiful tear-drop style, manufactured in the UK by Davey & Co. These blocks have brass sheaves. Note that the 1-1/2" bronze...
Foresti & Suardi
Small asymmetric brass strap hinges from Italian company Foresti & Suardi. These brass hinges are drilled for 8-gauge countersunk screws (not included). SKU Overall Length Width Finish...
Davey and Company
Traditional bronze stanchions cast in gunmetal and with a polished finish. These tapered stanchions are 27mm at the base and are available in three heights. A choice of three...
Spartan Marine Hardware
A range of cast bronze straight chocks or fairleads made in the USA by Spartan. Chocks are used at the bow, stern and amidships to guide mooring lines, anchor lines and other ropes. They...
Davey and Company
Stylish bronze vent commonly used for ventilating engine bays on timber motor boats. Part of the Davey range of boat hardware from England, these vents can be fitted with or without the included trim...
Davey and Company
Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length. Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt...
