Description
Gunmetal bronze quarter knees suitable for transom braces on small dinghies. Mounted with 4 x 10-gauge screws. Each bracket offers a 1/4" (6mm) hole for mainsheet bridle termination where a sailing rig is used.
Notes:
1. This fitting has rather an interesting design and will not fit all boats due to each strap tapering in a different direction. On a boat with horizontal mounting surfaces the bracket will not be horizontal once fixed in place.
2. Degrees of taper in the below diagram are approximate only.
3. Port and starboard fittings are sold separately
Dimenesions:
A = 4-1/4” (110mm)
B = 3-3/4” (95mm)
