Description
Gunmetal bronze backing plate for our coaming cleat. Made by Spartan Marine in the US.
Measuring 60mm x 22mm (2-1/2" x 7/8"), this backing plate has two countersunk holes to take 1/4" machine screws.
Gunmetal bronze backing plate for our coaming cleat. Made by Spartan Marine in the US.
Measuring 60mm x 22mm (2-1/2" x 7/8"), this backing plate has two countersunk holes to take 1/4" machine screws.
Spartan Marine Hardware
Gunmetal bronze backing plate for our diamond coaming cleat. Made by Spartan Marine in the US. Measuring 40mm x 70mm (1-1/2" x 2-3/4"), this backing plate has been pre-drilled for 1/4" machine...
Australian-made polished bronze or chrome plated torpedo-shaped cleat in a classic design. Sometimes known as "Fender Cleats", these fittings can also provide a quick and easy fender tie-off...
Spartan Marine Hardware
Bronze Herreshoff cleats from US manufacturer Spartan. These strong, traditional cleats feature four counter-sunk mounting holes to allow solid mounting through the deck. Available in a range...
Spartan Marine Hardware
A solid bronze 5" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with two 1/4"-20 (UNC) threads and a bronze backing plate is available for...
Davey and Company
Bronze bollard available in a range of sizes from just 2-1/2" through to 6" across the arms. This pretty fitting from Davey can double as a mooring bollard and cleat. Pre-drilled with four...