Description
Gunmetal bronze backing plate for our diamond coaming cleat. Made by Spartan Marine in the US.
Measuring 40mm x 70mm (1-1/2" x 2-3/4"), this backing plate has been pre-drilled for 1/4" machine screws.
Gunmetal bronze backing plate for our diamond coaming cleat. Made by Spartan Marine in the US.
Measuring 40mm x 70mm (1-1/2" x 2-3/4"), this backing plate has been pre-drilled for 1/4" machine screws.
Spartan Marine Hardware
Gunmetal bronze backing plate for our coaming cleat. Made by Spartan Marine in the US. Measuring 60mm x 22mm (2-1/2" x 7/8"), this backing plate has two countersunk holes to take 1/4" machine...
Davey and Company
Cast from gunmetal bronze and made in the UK, these beautiful diamond eye plates are for lighter duties, such as attaching fender lines. With a diamond-shaped base, these bronze plates can be...
Spartan Marine Hardware
A solid bronze 6" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with three 1/4"-20 (UNC) threads and a bronze backing plate is available for...
Spartan Marine Hardware
Made in the USA, these strong manganese bronze chain plates provide a number of options for deck-mounted rigging points on your boat. Cast and machined to accept large-diameter bolt-through...
Davey and Company
Undrilled bronze chain plates (or bowsprit shroud plates) with a polished bronze finish. Cast in the United Kingdom, these beautifully made bronze shroud plates are undrilled. This allows the...