Strong cast bronze stem head fitting for loads associated with sailing dinghies up to around 18' in length.
Note that this fitting is cast at an 85 ° angle and it is recommended to not attempt bending.
These attractive fittings are made in England and can be fastened with 3 x 8g screws.
| SKU | Vertical Strap Length | Short Strap Length | Width | Height Above Stem | Davey's Product Code |
|---|---|---|---|---|---|
| 021101 | 6" (150mm) | 1" (25mm) | 1" (25mm) | 1-5/16" (34mm) | 3727/GM |
Davey and Company
Cast bronze stem head fitting for sailing dinghies up to around 12' in length. Note that this fitting is cast at an 80° angle and it is recommended to not attempt bending. These attractive...
Davey and Company
Gunmetal bronze stemhead roller by Davey. These strong fittings are ideal for mounting to the side of a bowsprit to take mooring lines or anchor chain. Available in two sizes so suit chain from...
New Zealand-made gunmetal bronze skin fittings made from heavy duty polished gunmetal bronze with a tapered outer head to reduce drag. These bronze fittings come complete with a solid backing nut and...
Davey and Company
Bronze spinnaker pole fitting from UK company Davey available in two sizes. This spinnaker end socket is designed to fit to a wooden spar and features a sprung piston end. This fitting can also...
Davey and Company
Solid cast bronze window frames suitable for wooden speed boats, launches and other vessels by Davey & Co. These beautifully finished windscreen fittings are supplied without glass. They...
Spartan Marine Hardware
Made in the USA, these solid cast bronze hull fittings have a low profile design with radius edges. Featuring a caulking groove beneath the flange, these through-hulls are cast with internal dogs to...
Davey and Company
Produced by Davey, these bronze fittings (sold individually and without the timber bar) can be paired to hold a timber rod for an attractive bar cleat. A single 8g screw hole on the underside of the...
Spartan Marine Hardware
Made in the USA, these solid cast bronze hull fittings can be mounted to provide a flush finish on the hull. Featuring a caulking groove beneath the flange, these through-hulls skin fittings are cast...
Davey and Company
A gunmetal bronze bar cleat fitting available in two sizes. This bar cleat consists of three separate parts: two through-bolts to hold the oval timber bar, and a base plate. Use this bar...
